Rob Allen Replacement Shafts
Description
ROB ALLEN SPRING STEEL SHAFT - 6.6mm
Engineered from ultra tough oil quenched carbon alloy spring steel, they are tempered to 2100Mpa.
Tri-cut tips shafts ensure excellent penetration with 270 degree polished wishbone notches and polished line holes ensure minimum wear.
Each spear is mechanically de-coiled from the heat treated bulk roll and hand straightened and quality checked before machining.
6.6mm diameter shaft for 75cm gun.
Rob Allen Shafts are designed to fit all Euro speargun mechanisms.
Genuine Rob Allen spear to suit a 100cm gun
ROB ALLEN SPRING STEEL SPEAR - 6.6mm
Engineered from ultra tough oil quenched carbon alloy spring steel, they are tempered to 2100Mpa.
Tri-cut tips spears ensure excellent penetration with 270 degree polished wishbone notches and polished line holes ensure minimum wear.
Each spear is mechanically de-coiled from the heat treated bulk roll and hand straightened and quality checked before machining.
6.6mm diameter spear for 1.1m gun.
Rob Allen Spears are designed to fit all Euro gun mechanisms.
Product Code & Description: 800518 - ROB ALLEN SPRING STEEL SPEAR - 6.6mm
Engineered from ultra tough oil quenched carbon alloy spring steel, they are tempered to 2100Mpa.
Tri-cut tips spears ensure excellent penetration with 270 degree polished wishbone notches and polished line holes ensure minimum wear.
Each spear is mechanically de-coiled from the heat treated bulk roll and hand straightened and quality checked before machining.
6.6mm diameter spear for 1.2m gun.
Rob Allen Spears are designed to fit all Euro gun mechanisms.
ROB ALLEN SPRING STEEL SPEARS - 7mm
Designed for good speed and excellent penetration, 7mm shafts are a good all round choice for larger fish. Best with a single double 14mm, double 16mm or single 20mm band depending on the length of the gun and power required.
Engineered from ultra tough oil quenched carbon alloy spring steel, they are tempered to 2100Mpa.
Tri-cut tips spears ensure excellent penetration with 270 degree polished wishbone notches and polished line holes ensure minimum wear.
Each spear is mechanically de-coiled from the heat treated bulk roll and hand straightened and quality checked before machining.
7mm diameter spear for 1.1m gun.
Rob Allen Spears are designed to fit all Euro gun mechanisms.
Product Code & Description: 800529 - ROB ALLEN SPRING STEEL SPEARS - 7.5mm
Designed to penetrate large deep bodied fish at longer range, 7.5mm shafts retain much of the kinetic energy at the edge of their range. Best with 2 x 16mm rubbers.
Engineered from ultra tough oil quenched carbon alloy spring steel, they are tempered to 2100Mpa.
Tri-cut tips spears ensure excellent penetration with 270 degree polished wishbone notches and polished line holes ensure minimum wear.
Each spear is mechanically de-coiled from the heat treated bulk roll and hand straightened and quality checked before machining.
7.5mm diameter spear for 1.3m gun.
Rob Allen Spears are designed to fit all Euro gun mechanisms.
Rob Allen off-set double flopper 7.5mm spears are for the serious fish!
Don't bother with in-accurate slip tips.
These spears are proven in South Africa on 100+ kg monsters daily Designed with two heavy-duty pre-tuned smooth edged floppers, with great holding capability and tri-cut tip for maximum penetration.
Floppers are offset and opposing, providing greater holding power - particularly effective on doggies, mackeral and wahoo, as well as all other pelagic fish.
Engineered from ultra-tough oil quenched carbon alloy spring steel, they are tempered to 2100Mpa.
Rhino plated for rust prevention.
7.5mm double flopper spears available for the following guns - 130cm & 140cm guns.
Rob Allen off-set double flopper 7.5mm spears are for the serious fish!
Don't bother with in-accurate slip tips.
These spears are proven in South Africa on 100+ kg monsters daily Designed with two heavy-duty pre-tuned smooth edged floppers, with great holding capability and tri-cut tip for maximum penetration.
Floppers are offset and opposing, providing greater holding power - particularly effective on doggies, mackeral and wahoo, as well as all other pelagic fish.
Engineered from ultra-tough oil quenched carbon alloy spring steel, they are tempered to 2100Mpa.
Rhino plated for rust prevention.
7.5mm double flopper spears available for the following guns - 130cm & 140cm guns.
| Image | Code | Description | Product Name | Price | Quantity |
|---|---|---|---|---|---|
|
|
800510
|
DescriptionROB ALLEN SPRING STEEL SHAFT - 6.6mm |
Rob Allen 6.6mm Shaft for 750 Gun
|
$109.99 (Incl GST)
|
|
|
800514-1
|
DescriptionGenuine Rob Allen spear to suit a 100cm gun |
Rob Allen 7.5mm Shaft for 100cm
|
$109.99 (Incl GST)
|
|
|
800516
|
DescriptionROB ALLEN SPRING STEEL SPEAR - 6.6mm |
Rob Allen 6.6mm Shaft for 1100
|
$109.99 (Incl GST)
|
|
|
800518
|
DescriptionProduct Code & Description: 800518 - ROB ALLEN SPRING STEEL SPEAR - 6.6mm |
Rob Allen 6.6mm Shaft for 1200
|
$109.99 (Incl GST)
|
|
|
800522
|
DescriptionROB ALLEN SPRING STEEL SPEARS - 7mm |
Rob Allen 7mm Shaft for 1100
|
$109.99 (Incl GST)
|
|
|
800529
|
DescriptionProduct Code & Description: 800529 - ROB ALLEN SPRING STEEL SPEARS - 7.5mm |
Rob Allen 7.5mm Shaft for 1300
|
$109.99 (Incl GST)
|
|
|
800532
|
DescriptionRob Allen off-set double flopper 7.5mm spears are for the serious fish! |
Rob Allen 7.5mm Double Flopper Shaft for 130
|
$119.99 (Incl GST)
|
|
|
800533
|
DescriptionRob Allen off-set double flopper 7.5mm spears are for the serious fish! |
Rob Allen 7.5mm Double Flopper Shaft for 140
|
$119.99 (Incl GST)
|
